Product Overview
The Schneider ELAU VDM01D22AA00 is a higher-power PacDrive M MC-4 single-axis servo drive corresponding to technical model MC-4/11/22/400. It operates from a three-phase 380-480 VAC supply and delivers 22 A rated continuous current with a one-second peak current of 55 A.
With a rated output of 15.2 kVA and an integrated braking circuit, this model is intended for machine axes requiring higher torque, rapid acceleration and controlled regenerative braking. The exact VDM reference, firmware and motor combination must be verified before replacement.
Main Features
- Exact commercial reference: VDM01D22AA00
- Technical model: MC-4/11/22/400
- ELAU order number: 13130254
- Rated continuous current: 22 A
- Peak current for 1 second: 55 A
- Rated output power: 15.2 kVA
- Three-phase 380-480 VAC mains supply
- Integrated 42 ohm braking resistor
- 150 W continuous braking power
- 15 kW peak braking power
- Sercos fiber-optic communication
- Automatic compatible motor recognition
- Integrated Inverter Enable input
- Temperature-controlled fan cooling
Technical Specifications
| Model |
VDM01D22AA00 |
| Series |
PacDrive M MC-4 |
| Technical Model |
MC-4/11/22/400 |
| ELAU Order Number |
13130254 |
| Product Type |
Single-Axis Servo Drive / Servo Amplifier |
| Rated Continuous Current |
22 A RMS at 8 kHz |
| Peak Current |
55 A RMS for 1 second |
| Rated Output Power |
15.2 kVA |
| Mains Supply |
Three-phase 380-480 VAC, -10% / +10% |
| Supply Frequency |
48-62 Hz |
| Control Supply |
24 VDC, -15% / +25%, 1 A |
| DC Bus Voltage |
530-680 VDC |
| DC Bus Capacitance |
705 uF |
| DC Bus Overvoltage Threshold |
860 VDC |
| Internal Braking Resistor |
42 ohm |
| Continuous Braking Power |
150 W |
| Peak Braking Power |
15 kW |
| Digital Input |
20-30 VDC, approximately 5 mA |
| Inverter Enable Input |
20-30 VDC, approximately 30 mA |
| Relay Output |
20-30 VDC, maximum 2 A |
| Communication |
Sercos fiber-optic input and output |
| Cooling Method |
Temperature-controlled internal fan |
| Fan Switching Threshold |
Approximately 55 deg C |
| Housing Protection |
IP20 |
| Operating Temperature |
5-45 deg C without derating; up to 55 deg C with current derating |
| Approximate Dimensions |
310 x 160 x 400 mm |
| Approximate Net Weight |
6.3 kg |
| Approximate Packaged Weight |
7.0 kg |
| Lifecycle |
Discontinued legacy product |
Compatible System and Applications
The VDM01D22AA00 is suitable for higher-load PacDrive M axes used in packaging machinery, cartoning systems, printing and converting equipment, robotic handling, high-inertia conveyors, rotary processing machinery and automated production equipment.
Correct sizing depends on motor continuous current, peak torque, acceleration cycle, regenerative energy and braking duty. The 22 A drive should not be selected only because its current rating exceeds that of the original unit.
Maintenance and Replacement Notes
Confirm the exact commercial reference, technical model, order number, firmware suffix and hardware revision. Back up the PacDrive controller project and record the two-digit Sercos address before removing the existing drive.
Inspect the cooling fan, DC bus terminals, braking circuit, motor terminals, protective earth, Sercos fiber-optic cables and encoder connection. Verify the motor model, feedback type, holding brake, current rating and machine duty cycle.
Because different VDM suffixes can correspond to different firmware families, replacing an AA drive with another suffix may require controller-software verification or firmware alignment.
Related Models
Confirmed related 22 A references include VDM01D22AB00, VDM01D22AD00, VDM01D22AF00, VDM01D22AG00, VDM01D22AH00, VDM01D22AK00, VDM01D22AL00, VDM01D22AP00 and VDM01D22AQ00.
Related lower-current MC-4 versions include VDM01D10AA00 and VDM01U30AA00. The higher-current family is represented by VDM01D50AA00. These models have different dimensions, current ratings, cable requirements and braking characteristics.
Inquiry and Supply Notes
Please provide the complete nameplate, firmware suffix, motor model, PacDrive controller model and photographs of the installation. Confirm whether the unit is required as a tested replacement or for repair. Product condition, fan condition, firmware, included accessories, availability and delivery time must be confirmed before quotation.
|
|
Schneider ELAU VDM01D22AA00 PacDrive MC-4/11/22/400 22A 400V Single-Axis Servo Drive Images
|
